Hose End Connections
This Fitting are easy to assemble Possesses Unique locking action by back Formula and Resistant to Vibration and Pressure Pulses, Silver Plated Nuts prevent sizing on Stainless Steel and no torque is transmitted to the tube. It is suitable for high vacuum and Pressure Upto 10,000 Rs.2. They are made of Stainless Steel Tubes SS 316,304,3041,306 and are Available in '116' OD To 2 OD. Carbon steel bite Fittings Comprises Of a Special Ferrule which Grip the Pipe in Position And Perceptibly bites into the Pipes surface to Provide Positive Seal. It is also bowed Slightly in the middle and acts as a Spring which Prevents Loosening of the Joint under Vibration And Strain.Brass Olive Tube Fittings are used In Low Pressure.
Functions :- This Fitting are Available in Swage lock Type, Ermetto Type, Parker Type, Festo Type, Push in Type and Flare Type.
Uses :- Pneumatic Or Hydraulic Installation Air Logic, Systems, Chemical Handling, Centralized Lubrication Systems, Low Pressure Hydraulics, Gas Water And Fluid Lines.
Hose Assemblies
Hydraulic & Rubber Hose Assemblies
Functions :- This Fitting are Available in Swage lock Type, Ermetto Type, Parker Type, Festo Type, Push in Type and Flare Type.
Uses :- Pneumatic Or Hydraulic Installation Air Logic, Systems, Chemical Handling, Centralized Lubrication Systems, Low Pressure Hydraulics, Gas Water And Fluid Lines.
Hose Assemblies
When the corrugated hose is subjected to pressure, it tends to open axially. The wire braid is provided to prevent elongation caused by the pressure on the hose. This results in manifold increase in the hose's pressure strength. The braid also provides physical protection against damage to the tube and also dampens secondary vibration movements.
The braid is made of Stainless steel wire conforming to AISI 304/316/321. 
The angles of lay, wire thickness, number of strands are carefully selected to meet the various application requirements. The braid is woven in such a way that line pressure produces braid tension, and correspondingly provides radial and axial constraint prohibiting elongation of inner tubes. Multiple braided assemblies required to accommodate higher pressures, are also available.
Loose braids are also manufactured to meet specific requirements for rubber hoses and other flexible hoses of varied materials. These are tailor-made to meet customer needs.
The angles of lay, wire thickness, number of strands are carefully selected to meet the various application requirements. The braid is woven in such a way that line pressure produces braid tension, and correspondingly provides radial and axial constraint prohibiting elongation of inner tubes. Multiple braided assemblies required to accommodate higher pressures, are also available.Loose braids are also manufactured to meet specific requirements for rubber hoses and other flexible hoses of varied materials. These are tailor-made to meet customer needs.
Hydraulic & Rubber Hose Assemblies
A hydraulic hose consists of an inner tube through which the fluid is conveyed and comes into direct contact with the hydraulic fluid. The rubber or other synthetic material used for this needs to be compatible and able to withstand the range of working temperature without losing its chemical and physical stability.
The hydraulic hoses can be made using a variety of materials, depending on the factors of oil compatibility, abrasion resistance etc. These include:
Homogeneous Synthetic Rubber :-
This category includes hose materials like: Buna N, Neoprene, Natural rubber, Butyl etc.
The hydraulic hose is an important element in the system that needs to be checked for its reliability and durability during the manufacture process. In many hydraulic systems, it is necessary to move the drive unit along with the oil lines. Here, synthetic-rubber is suited as the material for the hydraulic hoses. Plastic tubings are also used in hydraulic systems to convey the fluid.
The hydraulic hoses can be made using a variety of materials, depending on the factors of oil compatibility, abrasion resistance etc. These include: Homogeneous Synthetic Rubber :-
This category includes hose materials like: Buna N, Neoprene, Natural rubber, Butyl etc.
The hydraulic hose is an important element in the system that needs to be checked for its reliability and durability during the manufacture process. In many hydraulic systems, it is necessary to move the drive unit along with the oil lines. Here, synthetic-rubber is suited as the material for the hydraulic hoses. Plastic tubings are also used in hydraulic systems to convey the fluid.
Futuristic Software Consultancy